CRAWLAGON! TERRAIN 13G
*****3D Print Files Only!*****
Digital Download Only, 3d Print .stl files Only
RC rock crawling system for 1/24, 1/18, and 1/16 scale crawlers.
Fully expandable and customizable RC Crawler course, Sky's the limit!
The first full Terrain piece to have the new Grip adder! this
This Terrain is 6" tall with some easy lines and some hard ones.
Fun for all rigs!
This is a great starter one if you are new to the Terrain pieces
Purchase is for TERRAIN 13G
- Designed by Dirt Digg-ler Offroad LLC DBA CRAWLAGON™, all rights reserved, for personal use only, No commercial use.
Each tile is 150mm wide (~6") and are interlocked by locking pins underneath.
You can configure and re-configure any way you would like!
Join our CRAWLAGON facebook group and show off your builds.
ENJOY!!!!
3D printing settings
Print Instructions
- *** WHEN PRINTING FG2 YOU WILL GET AN ERROR IN YOUR SLICER. JUST PRINT ANYWAY AND IT WILL WORK. DO NOT ADD SUPPORTS***
- Level your bed properly to avoid locking pin problems. If you have trouble with leveling, try printing with a raft.
- Different sized pins are included to compensate for any bed leveling issues and different materials.
- I can print these models on my Bambu Labs A1 without supports, even with sharp undercuts. Other printers might require support structures.
- Use a consistent 15% infill setting to avoid fitment problems. Changing infill percentages can affect wall shrinkage. If needed, you can add more wall loops to compensate and additional sized pins are included.
