TERRAIN 11: CLIFF HANGER

CRAWLAGON! TERRAIN 11: CLIFF HANGER

*****3D Print Files Only!*****

Digital Download Only, 3d Print .stl files Only

RC rock crawling system for 1/24, 1/18, and 1/16 scale crawlers.
Fully expandable and customizable RC Crawler course, Sky's the limit!

Introducing CLIFF HANGER!!
This one is very very difficult and will test you and your rig to its limits! there is a vertical drop on one side and a undercut cliff on the other. you can take the easy way and drive over the top if your width is short enough or hook 1 or 2 tires on the cliff edge and scoot your way across!

Tip: when you have 1 tire on the ledge turn your wheel upward instead of along the cliff edge. this will cause your tire to pull you into the ledge face. make sure you have a good steering servo for this one.
Slow and steady!

Purchase is for TERRAIN 11: CLIFF HANGER
- Designed by Dirt Digg-ler Offroad LLC DBA CRAWLAGON™, all rights reserved, for personal use only, No commercial use.

Each tile is 150mm wide (~6") and are interlocked by locking pins underneath.
You can configure and re-configure any way you would like!

Join our CRAWLAGON facebook group and show off your builds.
ENJOY!!!!

Print Instructions
-- Due to the size of this print I used 15% lightning fill, 4 base, 2 wall, 4 top. the print is light and will flex under pressure but holds up fine to the RC crawlers. you will need pin size +.1 if you print with these settings.

• *** WHEN PRINTING YOU WILL GET AN ERROR IN YOUR SLICER. JUST PRINT ANYWAY AND IT WILL WORK. DO NOT ADD SUPPORTS***
• Level your bed properly to avoid locking pin problems. If you have trouble with leveling, try printing with a raft.
• Different sized pins are included to compensate for any bed leveling issues and different materials.
• I can print these models on my Bambu Labs A1 without supports, even with sharp undercuts. Other printers might require support structures.
• Use a consistent 15% infill setting to avoid fitment problems. Changing infill percentages can affect wall shrinkage. If needed, you can add more wall loops to compensate and additional sized pins are included.