FREE: FG Rock 1

********3D Print Files Only!*********

Digital Download Only, 3d Print .stl files

*********************************

Here is a freebee test print you can try out.

The FG Rock or Full Grip Rock series come with 3 levels of 3d printable traction!!
FG Rock: regular 3d printed surface
FG1: Grip level 1
FG2: Grip level 2 Note: slicer will error, print anyway, do not add supports
These are great rocks for the Vertical packs, giving you A LOT of traction on those steep 30 or 40 deg inclines!!

CRAWLAGON! FG ROCK 1
RC rock crawling system for 1/24, 1/18, and 1/16 scale crawlers.
Fully expandable and customizable RC Crawler course, Sky's the limit!

Purchase is for FG ROCK 1
- Designed by Dirt Digg-ler Offroad LLC DBA CRAWLAGON™, all rights reserved, for personal use only, No commercial use.

Each tile is 150mm wide (~6") and are interlocked by locking pins underneath.
You can configure and re-configure any way you would like!

Join our CRAWLAGON facebook group and show off your builds.
ENJOY!!!!

Print Instructions
- *** WHEN PRINTING FG2 YOU WILL GET AN ERROR IN YOUR SLICER. JUST PRINT ANYWAY AND IT WILL WORK. DO NOT ADD SUPPORTS***
- Level your bed properly to avoid locking pin problems. If you have trouble with leveling, try printing with a raft.
- Different sized pins are included to compensate for any bed leveling issues and different materials.
- I can print these models on my Bambu Labs A1 without supports, even with sharp undercuts. Other printers might require support structures.
- Use a consistent 15% infill setting to avoid fitment problems. Changing infill percentages can affect wall shrinkage. If needed, you can add more wall loops to compensate and additional sized pins are included.