Terrain 12G *Now with Grip!!*

********3D Print Files Only!*********

Digital Download Only, 3d Print .stl files

*********************************

Now with Grip!!

*Added Grip version and updated none Grip version 12/25/2025

*Added Bambu Studio .3mf project file 12/25/2025

Test out your FLEX

Terrain 12 is a 9 tile obstacle with varying rock sizes.

The first rock is 1.5" tall followed by 2.25" then a giant 3" on both sides.

Depending on the length and configuration of your vehicle and angle this can be very challenging or walk right through it. 

*Included is the regular version and the Grip Version!

Each tile is 150mm wide (~6") and are interlocked by locking pins underneath.

Join our CRAWLAGON facebook group and show off your builds.

ENJOY!!!!

 - Designed by Dirt Digg-ler Offroad LLC DBA CRAWLAGON™, all rights reserved, for personal use only, No commercial use.

Printer Settings:

- Level your bed properly to avoid locking pin problems. If you have trouble with leveling, try printing with a raft.

- Different sized pins are included to compensate for any bed leveling issues and different materials.

- I can print these models on my Bambu Labs A1 without supports, even with sharp undercuts. Other printers might require support structures.

- Since this is such a beast of a print I have actually changed my settings a bit which does require using slightly larger pins (+.1)

I now use, 4 top layer, 4 bottom layer, 2 sidewall, 10% sparse infill adaptive cubic. saves a ton of time and material.